Publication Record
Eiji Akiyama
I.
Corrosion
1
The effect of magnesium on the corrosion behavior of sputter-deposited
amorphous Al-Mg-Ti ternary alloys in a neutral chloride solution
E. Akiyama, H. Yoshioka, J. H. Kim, H. Habazaki, A. Kawashima, K. Asami
and K. Hashimoto
Corrosion
Science, 34, 27-44 (1993).
2
Preparation of protective alumina coating on austenitic stainless steel
by sol-gel method
Y. Wang, E. Akiyama, H. Habazaki, A. Kawashima, K. Asami
and K. Hashimoto
Zairyo-to-Kankyo [Corros. Eng.], 42 [3], 158-165
(1993). (in Japanese)
ゾル・ゲル方により316ステンレス鋼上に作製したアルミナ被覆の保護性
王穎，秋山英二，幅崎浩樹，川嶋朝日，浅見勝彦，橋本功二
材料と環境,42 [3], 158-165
(1993).
3
The corrosion behavior of sputter-deposited amorphous titanium-chromium
alloys in 1 M and 6 M HCl solutions
J. H. Kim, E. Akiyama, H. Yoshioka, H. Habazaki, A. Kawashima, K. Asami
and K. Hashimoto
Corrosion
Science, 34, 975-988
(1993).
4
Corrosion-resistant chromium-valve metal alloys
K. Hashimoto, J. H. Kim, E. Akiyama, H. Habazaki, A. Kawashima and K. Asami
Proc. 12th International
Corrosion Congress, Vol. 3A, 1102-1110
(1993).
5
Effect of rinsing on analytical results for passivity of amorphous
iron-chromium-metalloid alloys
K. Hashimoto, S. Kato, B.-M. Im, E. Akiyama, H. Habazaki, A.
Kawashima and K. Asami
Proc. 12th International Corrosion
Congress, Vol. 5B, 3940-3950
(1993).
6
The corrosion behavior of sputter-deposited amorphous chromium-zirconium
alloys in 6 M HCl solution
J. H. Kim, E. Akiyama, H. Habazaki, A. Kawashima, K. Asami
and K. Hashimoto
Corrosion
Science, 34, 1817-1827
(1993).
7
Electrochemical and XPS studies of effects of alloying elements on the
corrosion behavior of amorphous Fe-Cr-metalloid alloys in 9 M
H2SO4
B.-M. Im, E. Akiyama, H. Habazaki, A. Kawashima, K. Asami
and K. Hashimoto
Corrosion
Science, 34, 1829-1839
(1993).
8
The corrosion behavior of sputter-deposited amorphous Cr-Nb and Cr-Ta alloys in 12 M HCl
solution
J. H. Kim, E. Akiyama, H. Habazaki, A. Kawashima, K. Asami
and K. Hashimoto
Corrosion
Science, 34, 1947-1955
(1993).
9
The corrosion behavior of sputter-deposited amorphous Al-Ti-Ni alloys in
1 M HCl solution
E. Akiyama, H. Habazaki, A. Kawashima, K. Asami
and K. Hashimoto
Corrosion, Electrochemistry and Catalysis of
Metastable Metals and Intermetallics, (ed. C. R. Clayton and K. Hashimoto),
p.26-37, The Electrochemical Society, Pennington,
NJ (1993).
10
The corrosion behavior of sputter-deposited amorphous Al-Cr
alloys
J. H. Kim, E. Akiyama, H. Yoshioka, H. Habazaki, A. Kawashima, K. Asami
and K. Hashimoto
Corrosion, Electrochemistry and Catalysis of Metastable Metals and Intermetallics, (ed. C. R.
Clayton and K. Hashimoto), p.48-59, The Electrochemical Society,
Pennington, NJ (1993).
11
An XPS study of the corrosion behavior of sputter-deposited amorphous
Cr-Nb and Cr-Ta alloys in 12 M HCl solution
J. H. Kim, E. Akiyama, H. Habazaki, A. Kawashima, K. Asami
and K. Hashimoto
Corrosion Science, 36, 511-523 (1994).
12
Highly corrosion-resistant amorphous Cr-Ni-P alloys
B.-P. Zhang, E. Akiyama, H. Habazaki, A. Kawashima, K. Asami
and K. Hashimoto
Mater.
Sci. Eng. A181/A182, 1114-1118 (1994).
13
Effect of phosphorus on the passivation
behavior of amorphous Fe-8Cr-13P-7C alloy in 9 M H2SO4
solution
B.-M. Im, E. Akiyama, H. Habazaki, A. Kawashima, K. Asami
and K. Hashimoto
Mater. Sci. Eng. A181/A182, 1119-1122 (1994).
14
The corrosion behavior of sputter-deposited amorphous Ni-Ti alloys in 1 M
HCl solution
E. Akiyama, H. Habazaki, A. Kawashima, K. Asami
and K. Hashimoto
Mater.
Sci. Eng. A181/A182, 1128-1132 (1994).
15
The corrosion behavior of sputter-deposited amorphous Cr-Ni-Mo alloys in
12 M HCl solution
P.
Y. Park, E. Akiyama, H. Habazaki, A. Kawashima, K.
Asami and K. Hashimoto
Corrosion
Science, 36, 1395-1410 (1994).
16
The corrosion behavior of amorphous Fe-8Cr-13P-7C and Fe-8Cr-20P alloys
in concentrated sulfuric acid
B. M. Im, E. Akiyama,
H. Habazaki, A. Kawashima, K. Asami and K. Hashimoto
Corrosion Science, 36, 1537-1550 (1994).
17
Preparation of protective multilayer SiO2 and Al2O3 coatings on
austenitic stainless steel by sol-gel method
A. Kawashima,
Y. Wang, E. Akiyama, H. Habazaki, K. Asamim and K. Hashimoto
Zairyo-to-Kankyo [Corros. Eng.], 43[11], 654-659
(1994).
18
The corrosion behavior of sputter-deposited amorphous Mo-Zr alloys in 12 M HCl
P. Y. Park, E. Akiyama, H. Habazaki, A. Kawashima, K. Asami
and K. Hashimoto
Corrosion Science, 37, 307-320 (1995).
19
The effect of phosphorus addition on the corrosion behavior of amorphous
Ni-30Ta-P alloys in 12 M HCl
H. J. Lee, E. Akiyama, H. Habazaki, A. Kawashima, K. Asami
and K. Hashimoto
Corrosion Science, 37, 321-330 (1995).
20
Change in the surface composition of amorphous Fe-Cr-Mo-P-C alloys during
air exposure
M.-W. Tan, E. Akiyama, A. Kawashima, K. Asami and K. Hashimoto
Corrosion Science, 37, 331-341 (1995).
21
The effect of phosphorus addition on the corrosion behavior of amorphous
Fe-8Cr-P alloys in 9 M H2SO4
B.-M. Im, E. Akiyama,
H. Habazaki, A. Kawashima, K. Asami and K. Hashimoto
Corrosion Science, 37, 709-722 (1995).
22
Similarity and difference in roles of chromium and molybdenum in passivating amorphous alloys in concentrated acids
K. Hashimoto, P. Y. Park, J. H. Kim, E.
Akiyama, H. Habazaki, A. Kawashima and K. Asami
Mater.
Sci. Forum, 185-188, 779-788 (1995).
23
Indoor atmospheric corrosion behavior of rapidly quenched amorphous Zr-Cu alloys
K. Asami, E. Akiyama,
Y. Murakami, H. M. Kimura, M. Kikuchi and K. Hashimoto
Mater.
Sci. Forum, 185-188, 789-798 (1995).
24
The corrosion behavior of sputter-deposited amorphous Al-Cr-Ti alloys in
1 M HCl
E. Akiyama, A. Kawashima, K. Asami and K. Hashimoto
Mater.
Sci. Forum, 185-188, 809-818 (1995).
25
The effect of air exposure on the corrosion behavior of amorphous
Fe-8Cr-Mo-13P-7C alloys in 1 M HCl
M.-W. Tan, E. Akiyama, A. Kawashima, K. Asami and K. Hashimoto
Corrosion Science, 37, 1289-1302 (1995).
26
The effect of phosphorus on the passivation
behavior of Ni-10Ta-P alloys in 12 M HCl
H. J. Lee, E. Akiyama, H. Habazaki, A. Kawashima, K. Asami
and K. Hashimoto
Corrosion Science, 37, 1313-1324 (1995).
27
The effect of microcrystallites in the
amorphous matrix on the corrosion behavior of amorphous Fe-8Cr-P
alloys
B. M. Im, M. Komori,
B.-T. Lee, E. Aoyagi, E. Akiyama, H. Habazaki, A.
Kawashima, K. Asami, K. Hiraga and K. Hashimoto
Corrosion Science, 37, 1411-1422 (1995).
28
The corrosion behavior of sputter-deposited Cr-Mo alloys in 12 M HCl solution
P. Y. Park, E. Akiyama, A. Kawashima, K. Asami and K. Hashimoto
Corrosion Science, 37, 1843-1860 (1995).
29
The corrosion behavior of sputter-deposited amorphous W-Ti alloys in 6 M
HCl solution
J. Bhattarai, E.
Akiyama, A. Kawashima, K. Asami and K.
Hashimoto
Corrosion Science, 37, 2071-2086 (1995).
30
The corrosion behavior of sputter-deposited amorphous Al-Cr-Mo alloys in
1 M HCl
E. Akiyama, A. Kawashima, K. Asami and K. Hashimoto
Corrosion Science, 38, 279-292 (1996).
31
The Influences of Mo addition and air exposure on the corrosion behavior
of amorphous Fe-8Cr-13P-7C alloy in deaerated 1 M
HCl
M.-W. Tan, E. Akiyama, A. Kawashima, K. Asami and K. Hashimoto
Corrosion Science, 38, 349-365 (1996).
32
High temperature sulfidation and oxidation
behavior of sputter-deposited Al-refractory metal alloys
H. Mitsui, E. Akiyama, A. Kawashima, K. Asami, K. Hashimoto and S. Mrowec
Materials Transaction, JIM, 37, 379-382 (1996).
33
The corrosion behavior of Ni-Ta-5P alloys in concentrated hydrochloric
acid
H.-J. Lee, E. Akiyama, A. Kawashima, K. Asami and K. Hashimoto
Materials Transaction, JIM, 37, 383-388 (1996).
34
The effect of phosphorus addition on the corrosion behavior of arc-melted
Ni-10Ta-P alloys in 12 M HCl
H.-J. Lee, E. Akiyama, A. Kawashima, K. Asami and K. Hashimoto
Corrosion Science, 38, 469-485 (1996).
35
The corrosion behavior of sputter-deposited Mo-Ta alloys in 12 M HCl solution
P. Y. Park, E. Akiyama, A. Kawashima, K. Asami and K. Hashimoto
Corrosion Science, 38, 397-411 (1996).
36
A study of the structure of a passive film using angle-resolved X-ray
photo-electron spectroscopy
E. Akiyama, A. Kawashima, K. Asami and K. Hashimoto
Corrosion Science, 38, 1127-1140 (1996).
37
The corrosion behavior of amorpous and
crystalline Ni-10Ta-20P alloys in 12 M HCl
H. J. Lee, E. Akiyama, A. Kawashima, K. Asami and K. Hashimoto
Corrosion Science, 38, 1269-1279 (1996).
38
The effects of alloying elements on passivity of sputter-deposited
amorphous Al-Cr-Mo alloys in 1 M HCl
E. Akiyama, A. Kawashima, K. Asami and K. Hashimoto
Corrosion Science, 38, 1281-1294 (1996).
39
The influences of pre-immersion on the polarization behavior of amorphous
Fe-Cr-Mo-P-C Alloy in deaerated 1 M HCl
M.-W. Tan, E. Akiyama, A. Kawashima, K. Asami and K. Hashimoto
Corrosion Science, 38, 1495-1511 (1996).
40
The corrosion behavior of sputter-deposited Mo-Ti alloys in concentrated
hydrochloric acid
P. Y. Park, E. Akiyama, H. Habazaki, A. Kawashima, K. Asami
and K. Hashimoto
Corrosion Science, 38, 1649-1667 (1996).
41
The corrosion behavior of sputter-deposited Mo-Nb alloys in 12 M HCl
solution
P. Y. Park, E. Akiyama, H. Habazaki, A. Kawashima, K. Asami
and K. Hashimoto
Corrosion Science, 38, 1731-1750 (1996).
42
The role of chromium and molybdenum in passivation of amorphous Fe-Cr-Mo-P-C alloys in deaerated 1 M HCl
M.-W. Tan, E. Akiyama, H. Habazaki, A. Kawashima, K. Asami
and K. Hashimoto
Corrosion Science, 38, 2137-2151 (1996).
43
XPS study of Ni-Mo-B amorphous Ultra-fine particles prepared by chemical
reduction
J. Saida, E. Akiyama,
K. Hashimoto, A. Inoue and T. Masumoto
J. Japan
Inst. Metals, 60, 79-83 (1996). (in Japanese)
化学還元法で作製したNI-Mo-B非晶質合金超微粒子のＸ線光電子分光法による解析
才田淳次，秋山英二，橋本功二，井上明久，増本健
日本金属学会誌, 60 [1], 79-83
(1996).
44
The corrosion behaviour of sputter-deposited
amorphous Mn-Ti alloys in 0.5 M NaCl solutions
A. A. El-Moneim,
B.-P. Zhang, E. Akiyama, H. Habazaki, A. Kawashima, K.
Asami and K. Hashimoto
Corrosion Science, 39, 305-320 (1997).
45
The roles of tantalum and phosphorus on the corrosion behaviorof Ni-Ta-P alloys in 12 M HCl"
H.-J. Lee, E. Akiyama, H. Habazaki, A. Kawashima, K. Asami
and K. Hashimoto
Corrosion Science, 39, 321-332 (1997).
46
Electrochemical and XPS studies of the corrosion behavior of
sputter-deposited amorphous W-Zr alloys in 6 and 12 M
HCl solutions
J. Bhattarai, E.
Akiyama, H. Habazaki, A. Kawashima, K. Asami And K. Hashimoto
Corrosion Science, 39, 355-375 (1997).
47
The effect of molybdenum on the stability of passive films formed on
amorphous Fe-Cr-Mo-P-C alloys by potentiostatic
polarization in deaerated M HCl"
M.-W. Tan, E. Akiyama, H. Habazaki, A. Kawashima, K. Asami
and K. Hashimoto
Corrosion Science, 39, 589-603 (1997).
48
Spontaneously passivated films on
sputter-deposited Cr-Ti alloys in 6 M HCl
solution
X.-Y. Li, E. Akiyama, H. Habazaki, A. Kawashima, K. Asami
and K. Hashimoto
Corrosion Science, 39, 935-948 (1997).
49
An angle-resolved XPS study of the in-depth structure of passivated amorphous aluminum alloys
E. Akiyama, A. Kawashima, K. Asami and K. Hashimoto
Corrosion Science, 39, 1351-1364 (1997).
50
An XPS study of passive films on corrosion-resistant Cr-Zr alloys prepared by sputter deposition
X.-Y. Li, E. Akiyama,
H. Habazaki, A. Kawashima, K. Asami and K. Hashimoto
Corrosion
Science, 39, 1365-1380 (1997).
51
The sulphidation and oxidation behavior of
sputter-deposited Cr-refractory metal alloys at high temperatures
H. Habazaki, K. Ito,
H. Mitsui, E. Akiyama, A. Kawashima, K. Asami, K.
Hashimoto and S. Mrowec
Mater.
Sci. Eng., A226-228, 910-914 (1997).
52
Corrosion-resistant amorphous aluminum alloys and structure of passive
films
E. Akiyama, H. Habazaki, A. Kawashima, K. Asami,
K. Hashimoto
Mater.
Sci. Eng., A226-228, 920-924 (1997).
53
The corrosion behavior of sputter-deposited amorphous Mn-Ta alloys in 0.5 M NaCl
solutions
A. A. El-Moneim, E.
Akiyama, H. Habazaki, A. Kawashima, K. Asami and K.
Hashimoto
Corrosion Science, 39, 1965-1979 (1997).
54
The corrosion behavior of Ni-Cr-Mo ternary alloys in hot concentrtated sulfuric acids with active carbon (Part
1)
K. Sugawara, Y. Takizawa, E. Akiyama and K.
Hashimoto
Zairyo-to-Kankyo [Corros. Eng.], 46, 643-650
(1997). (in Japanese)
活性炭を含む高温・濃硫酸中におけるNi-Cr-Mo合金の腐食挙動（第1報）
菅原活生，滝沢与司夫，秋山英二，橋本功二
材料と環境, 46, 643-650
(1997).
55
The corrosion behavior of Ni-Cr-Mo ternary alloys in hot concentrtated sulfuric acids with active carbon (Part
2)
K. Sugawara, Y. Takizawa, E. Akiyama and K.
Hashimoto
Zairyo-to-Kankyo [Corros. Eng.], 46, 702-708
(1997). (in Japanese)
活性炭を含む高温・濃硫酸中におけるNi-Cr-Mo合金の腐食挙動（第2報）
菅原活生，滝沢与司夫，秋山英二，橋本功二
材料と環境, 46, 702-708 (1997).
56
Electrochemical and XPS studies on the passivation behavior of sputter-deposited W-Cr alloys in 12
M HCl solution
J. Bhattarai, E.
Akiyama, H. Habazaki, A. Kawashima, K. Asami and K. Hashimoto
Corrosion Science, 40, 155-175 (1998).
57
Electrochemical and XPS studies on the corrosion behavior of
sputter-deposited W-Nb alloys in concentrated
hydrochloric acid solutions
J. Bhattarai, E.
Akiyama, H. Habazaki, A. Kawashima, K. Asami and K. Hashimoto
Corrosion Science, 40, 19-42 (1998).
58
An experimental evidence of the critical size of heterogeneity for
pitting corrosion of Cr-Zr alloys in 6 M HCl
M. Mehmood, B.-P.
Zhang, E. Akiyama, H. Habazaki, A. Kawashima, K. Asami and K. Hashimoto
Corrosion Science, 40, 1-17 (1998).
59
Passivity and its breakdown of sputter-deposited amorphous Mn-Zr alloys in neutral chloride solutions
A. A. El-Moneim, E.
Akiyama, H. Habazaki, A. Kawashima, K. Asami and K.
Hashimoto
Corrosion Science, 40, 235-250 (1998).
60
XPS study of transformation of air-formed film to passive film on sputter
deposited Mo-Nb alloys in 12 M HCl
D. Huerta, P.-Y. Park, E. Akiyama, H. Habazaki, A. Kawashima, K. Asami
and K. Hashimoto
Proc.
Symposium on Passivity and Its Breakdown, p.770-780,
The Electrochemical Society, Pennington,
NJ (1998).
61
The passivation behavior of sputter-deposited
W-Ta alloys in 12 M HCl
J. Bhattarai, E.
Akiyama, H. Habazaki, A. Kawashima, K. Asami and K. Hashimoto
Corrosion Science, 40, 757-779 (1998).
62
An XPS study of passive films on sputter-deposited Cr-Nb alloys in 12 M HCl solution
X.-Y. Li, E. Akiyama, H. Habazaki, A. Kawashima, K. Asami
and K. Hashimoto
Corrosion Science, 40, 821-838 (1998).
63
The effect of alloying elements on the corrosion behavior of
sputter-deposited amorphous Mn-Ta-Cr alloys in 1 N
H2SO4
A. A. El-Moneim, E.
Akiyama, H. Habazaki, A. Kawashima, K. Asami and K. Hashimoto
Corrosion Science, 40, 1491-1512 (1998).
64
XPS and electrochemical studies on the corrosion behaviour of sputter-deposited amorphous Mn-Nb alloys in a neutral chloride solution
A. A. El-Moneim, E.
Akiyama, H. Habazaki, A. Kawashima, K. Asami and K.
Hashimoto
Corrosion Science, 40, 1513-1532 (1998).
65
Electrochemical and XPS studies of the passivation behavior of sputter-deposited amorphous Cr-Ta
alloys in 12 M HCl
X.-Y. Li, E. Akiyama, H. Habazaki, A. Kawashima, K. Asami
and K. Hashimoto
Corrosion Science, 40, 1587-1604 (1998).
66
The influence of concentration of hydrochloric acid solutions on the
passivation behavior of sputter-deposited tungsten
rich W-Nb alloys
J. Bhattarai, E.
Akiyama, H. Habazaki, A. Kawashima, K. Asami and K. Hashimoto
Corrosion Science, 40, 1897-1914 (1998).
67
Change in pitting susceptibility with alloy heterogeneity induced by
crystallization of amorphous alloys
M. Mehmood, E.
Akiyama, H. Habazaki, A. Kawashima, K. Asami and K. Hashimoto
Mater.
Sci. Forum, 289-292, 629-640 (1998).
68
The critical size and nature of nanocrystalline
heterogeneity for pitting corrosion
K. Hashimoto, M. Mehmood, X.-Y. Li, E. Akiyama, H. Habazaki, A. Kawashima and K. Asami
Proc.
Symp. Critical Factors in Localized Corrosion
III, p.245-255, The Electrochemical Society,
Pennington, NJ (1998).
69
The effect of heat treatment on the corrosion behavior of
sputter-deposited aluminum-chromium alloys
M.
Mehmood, E. Akiyama, H. Habazaki, A. Kawashima, K. Asami
and K. Hashimoto
Corrosion Science, 41, 477-499
(1999).
70
Electrochemical and XPS studies of the corrosion behavior of
sputter-deposited amorphous Fe-Cr-Ni-Nb alloys in 6 M
HCl
X.-Y. Li, E. Akiyama, H. Habazaki, A. Kawashima, K. Asami
and K. Hashimoto
Corrosion Science, 41, 1095-1118 (1999).
71
The corrosion behavior of sputter-deposited amorphous Fe-Cr-Ni-Ta alloys
in 12 M HCl
X.-Y. Li, E. Akiyama, H. Habazaki, A. Kawashima, K. Asami
and K. Hashimoto
Corrosion Science, 41, 1849-1869 (1999).
72
The degradation of the corrosion resistance of sputter-deposited
chromium-titanium alloys by nanoscale
heterogeneity
M. Mehamood, E.
Akiyama, H. Habazaki, A. Kawashima, K. Asami and K. Hashimoto
Corrosion Science, 41, 1871-1890 (1999).
73
The sulfidation and oxidation behavior of
sputter-deposited Al-Mo-Nb alloys
K. Hon-yashiki, H.
Habazaki, E. Akiyama, A. Kawashima, K. Asami and K. Hashimoto
Mater.
Sci. Eng., A267, 277-284 (1999).
74
Corrosion-resistant Mn-Zr-Cr alloys in
chloride-containing media
A. A. El-Moneim, E.
Akiyama, H. Habazaki, A. Kawashima, A. Kawashima, K.
Asami and K. Hashimoto
Mater.
Sci. Eng., A267, 285-293 (1999).
75
The influence of dichromate ions on aluminum dissolution kinetics in
artificial crevice electrode cells
E. Akiyama and G. S.
Frankel
J. Electrochem. Soc., 146, 1095 (1999).
76
Effects of nanocrystalline heterogeneity on the
corrosion behavior of sputter-deposited chromium-niobium alloys
M. Mehmood, E.
Akiyama, H. Habazaki, A. Kawashima, K. Asami and K. Hashimoto
Corrosion Science, 42, 361-382 (2000).
77
Release of chromate ions from chromate conversion coatings on Al
alloys
E. Akiyama, L. Xia,
R. McCreery, A. Markworth
and G. S. Frankel
Proc. on
"Passivity and Localized Corrosion", (M. Seo, B. MacDougall, H. Takahashi and R. G. Kelly Eds.) The
Electrochemical Society pp300-309 (2000).
78
Oxidation Behavior of Amorphous Ni-Zr and
Ni-Zr-Rare Earth Element Alloys
M. Yamasaki, H. Habazaki, E. Akiyama, A. Kawashima, K. Asami and K. Hashimoto
Per
Kofstad Memorial Symposium on High Temperature
Corrosion and Materials Chemistry (P.Y. Hou, T. Maruyama, M.J. McNallan,
T. Narita, E.J. Opila and
D.A.
Shores Eds.) The
Electrochemical Society pp180-191 (2000).
79
Angle-resolved XPS for determination of diffusion coefficients and mobilities of cations in thin
passive films
K. Asami, E. Akiyama
and K. Hashimoto
Surf.
Int. Anal., 30, 106-111 (2000).
80
XPS determination of diffusion coefficients of cations in thin passive films on alloys
K. Asami, E. Akiyama
and K. Hashimoto
Solid
State Phenomena, 72, 79-84
(2000).
81
Strage and release of soluble hexavalent chromium from chromate conversion
coatings
Equilibrium aspects of CrVI
concentration
Lin Xia, Eiji Akiyama, Gerald Frankel and Richard McCreery
J. Electrochem. Soc., 147, 2556-2562 (2000).
82
Enhancement of corrosion resistance of amorphous
aluminum alloys by alloying additions
Eiji Akiyama, Katsuhiko Asami, Hiroki Habazaki, Asahi Kawashima and Koji Hashimoto
Proc. on “Corrosion and Corrosion Protection”,
J. D. Sinclair, E. Kalman, M. W. Kendig, W. Plieth, W. H. Smyrl, Eds., The Electrochemical Society, Pennington, NJ,
p1-8 (2001).
83
塑性域の軸力で締付けて海浜暴露したボルト内の吸蔵水素分布
阪下真司，秋山英二，津崎兼彰，松山晋作
鉄と鋼，88, 35-42 (2002).
Distribution of hydrogen occluded in bolts tightened beyond the yield
strength and exposed at a seashore site
Shinji Sakashita,
Eiji Akiyama, Kaneaki Tsuzaki and Shinsaku Matsuyama
Tetsu-to-Hagané, 88, 35-42 (2002).
84
Storage and release of soluble hexavalent
chromium from chromate conversion coatings on Al alloys; Kinetics of
release
E. Akiyama, A. J. Markworth, J. K. McCoy, G. S. Frankel, L. Xia and R. L. McCreery
J. Electrochem. Soc., 150, B83-B91 (2003).
85
A study of current transients caused by single particle impact on
electrodes
E. Akiyama, A. W. Hassel, M. Stratmann
Proc. on Asian-Pacific Corrosion Control
Conference, Asian-Pacific Materials & Corrosion Association, 027
(2003).
86
Electrochemical transients caused by single particle impacts
Eiji Akiyama, Achim W. Hassel, Martin Stratmann
Proc. on “Second International Conference on
Advanced Structural Steel”, CMS, CISRI & BAO STEEL,
Shanghai, China,
pp.911-914 (2004).
87
Estimation of delayed fracture resistance of high strength
steels
Maoqiu Wang, Eiji Akiyama, Keitaro Enami, Kaneaki Tsuzaki
Proc. on “Second International Conference on
Advanced Structural Steel”, CMS, CISRI & BAO STEEL,
Shanghai, China,
pp.646-649 (2004).
88
Hydrogen absorption behavior of high strength steels under atmospheric
corrosion
Katsuhiro Matsukado,
Eiji Akiyama, Kaneaki Tsuzaki
Proc. on “Second International Conference on
Advanced Structural Steel”, CMS, CISRI & BAO STEEL,
Shanghai, China,
pp.323-326 (2004).
89
Hydrogen degradation of a boron-bearing steel with 1050 and 1300 MPa strength levels
Maoqiu Wang, Eiji Akiyama, Kaneaki Tsuzaki
Scripta Materialia, 52, 403-408
(2005).
90
Crosshead speed dependence of the notch tensile strength of a high
strength steel in the presence of hydrogen
Maoqiu Wang, Eiji Akiyama, Kaneaki Tsuzaki
Scripta Materialia, 53, 713-718 (2005).
91
Effect of hydrogen and stress concentration on the notch tensile strength
of AISI 4135 steel
Maoqiu Wang, Eiji Akiyama, Kaneaki Tsuzaki
Materials Science and Engng
A, 398,
37-46 (2005).
92
Repassivation of titanium under particle
impingements
E. Akiyama and K. Tsuzaki
Proc. on “16th International Corrosion
Congress”, on CD P-18-B-2 (2005).
92
Evaluation of hydrogen embrittlement of high
strength by slow strain rate test
Maoqiu Wang, Eiji Akiyama, Kaneaki Tsuzaki
Proc. on “16th International Corrosion
Congress”, on CD P-10-H-14 (2005).
93
Hydrogen distribution inside the crevice and the variation with applied
potential
Thiyagarajan Sundararajan, Eiji Akiyama, Kaneaki Tsuzaki
Proc. on “16th International Corrosion
Congress”, on CD P-10-H-16 (2005).
94
Hydrogen mapping across crevice: Effect of applied potential
Thiyagarajan Sundararajan, Eiji Akiyama, Kaneaki Tsuzaki
Scripta Materialia, 53, 1219-1223 (2005).
95
Hydrogen mapping across crevice
Thiyagarajan Sundararajan, Eiji Akiyama, Kaneaki Tsuzaki
ELECTROCHEMICAL AND SOLID STATE LETTERS,
8, No. 9, B30-B33 (2005).
96
Effect of hydrogen on the fracture behavior of high-strength Cr-Mo
steel
Maoqiu Wang,
Eiji Akiyama, Kaneaki Tsuzaki
Materials Science Forum, 512, 55-60 (2006).
97
Acetate and chloride Effects on hydrogen production across the
crevice
Thiyagarajan Sundararajan, Eiji Akiyama, Kaneaki Tsuzaki
Materials Science
Forum, 512, 97-102 (2006).
98
A fracture criterion for hydrogen embrittlement
of a high strength steel
Maoqiu Wang, Eiji Akiyama, Kaneaki Tsuzaki
Materials Science and Technology,
22, 2, 167-172
(2006).
99
Determination of the critical hydrogen concentration for delayed fracture
of high strength steel by constant load test and numerical
calculation
Maoqiu Wang, Eiji Akiyama, Kaneaki Tsuzaki
Corrosion Science, 48, 2189-2202
(2006).
100 Depassivation and repassivation of
titanium under particle impingements
E. Akiyama and K. Tsuzaki
ECS
Transitions, 1, 4, 437-446 (2006).
101 Discrete
electrochemical transients of aluminium alloys
generated by slurry jet impingement
E. Akiyama, A. W. Hassel, M. Stratmann
Jouurnal of Physics D: Applied
Physics, 39, 3157-3164 (2006).
102 Hydrogen
entry in crevice region: Evaluation by hydrogen permeation technique
T. Sundararajan, E.
Akiyama and K. Tsuzaki
ISIJ
International, 46, 7, 1081-1085 (2006).
103 Hydrogen
embrittlement problems in high strength steel
bolts
Thiyagarajan Sundararajan, Eiji Akiyama, Kaneaki Tsuzaki
Proc. on “International Corrosion Congress,
CORCON 2005”, NACE international India Section, Chennai, India (2005), ts-15-1 on
CD.
104 Evaluation
of Delayed Fracture Properties of High Strength Steels for Bolts
E. Akiyama, M.Q. Wang, K. Matsukado, Z.G. Zhang, T. Sundararajan and K. Tsuzaki
Proc. on “The 3rd International Conference on Advanced
Structural Steels, Gyeongju, Korea, August
22-24, 2006”
105 Effect of
hydrogen on the fracture behavior of high strength steel during slow strain rate
test
Maoqiu Wang, Eiji Akiyama, Kaneaki Tsuzaki
Corrosion
Science, submitted.
106 Corrosion
behavior of Al-7wt% Si-1.5wt% Cu severely deformed by equal-channel angular
pressing
Zuogui Zhang, Eiji Akiyama, Yoshimi Watanabe,
Yasuyuki Katada and
Kaneaki Tsuzaki
Materials Science
Forum, accepted.
107 Influence
of microstructure on electrochemical properties of severely deformed Al-5 wt% Cu
alloy by ECAP
Zuogui Zhang, Eiji Akiyama, Yoshimi Watanabe,
Yasuyuki Katada and Kaneaki Tsuzaki
Materials Science
Forum, accepted.
108 Effect of
a-Al/Al3Ni microstructure on the corrosion behaviour of Al-5.4 wt% Ni alloy fabricated by equal-channel
angular pressing
Zuogui Zhang, Eiji Akiyama, Yoshimi Watanabe,
Yasuyuki Katada and Kaneaki Tsuzaki
Corrosion Science, submitted.
II. Electrodes
1
Amorphous alloy electrodes for anodic oxidation of sulfite
T. Mori, E. Akiyama, H. Habazaki, A. Kawashima, K. Asami
and K. Hashimoto
Mater.
Sci. Eng. A181/A182, 1081-1084 (1994).
2
Amorphous alloy electrodes for electro-oxidation of propane
H. Kishimoto, A.
Kawashima, E. Akiyama, K. Asami and K.
Hashimoto
Sci.
Rep.
Res.
inst.
Tohoku
University,
A41, 83-88 (1995).
3
Effect of cathodic reaction on catalytic
activity of amorphous alloy electrodes for electrooxidation of sulfite
T. Mori, A. Kawashima, E. Akiyama, H, Habazaki, K. Asami and K.
Hashimoto
J. Appl. Electrochem. 25, 953-961
(1995).
4
Characterization of sputtre-deposited Ni-Mo and
Ni-W alloy electochatalysts for hydrogen evolution in
alkaline solution
A. Kawashima, E. Akiyama, H. Habazaki and K. Hashimoto
Mater.
Sci. Eng. A226-228, 905-909 (1997).
5
Surface activation of manganese oxide electrode for oxygen evolution in
electrolysis of seawater
K. Izumiya, E. Akiyama, A. Kawashima, K. Asami and K. Hashimoto
J. Appl. Electrtochem. 27, 1362-1368 (1997).
6
Effects of additional elements on the electrocatalytic properties of thermally decomposed
manganese oxide electrodes for oxygen evolution from seawater
K. Izumiya, E. Akiyama, H. Habazaki, N. Kumagai, A. Kawashima
and K. Hashimoto
Mater.
Trans. JIM, 38, 899-905 (1997).
7
Mn-W oxide anodes prepared by thermal
decomposition for oxygen evolution in seawater electrolysis
K. Izumiya, E. Akiyama, H. Habazaki, N. Kumagai, A. Kawashima
and K. Hashimoto
Mater.
Trans. JIM, 39, 308-313 (1997).
8
Anodically deposited manganese oxide and
manganese-tungsten oxide electrodes for oxygen evolution from
seawater
K. Izumiya, E. Akiyama, H. Habazaki, N. Kumagai, A. Kawashima
and K. Hashimoto
Electrochimica Acta, 43, 3303-3321 (1998).
9
Hydrogen evolution characteristics of sputter-deposited Co-Mo, Co-Al and
Co-Mo-Al alloy electrodes in NaOH solution
T. Aihara, A.
Kawashima, E. Akiyama, H. Habazaki, K. Asami and K. Hashimoto
Mater.
Trans. JIM 39, 1017-1023 (1998).
10
Oxygen evolution anodes in seawater electrolysis for global
CO2 recycling
K.
Izumiya, K. Fujimura, E. Akiyama, H. Habazaki, A.
Kawashima and K. Hashimoto
Proc. on
EUROMAT'98, Conf. on Materials in Oceanic Environment, The Federation of European Materials Sciences, (1998)
pp.37-45.
11
Anodically deposited manganese-molybdenum oxide
anodes with high selectivity for evolving oxygen in electrolysis of
seawater
K. Fujimura, K. Izumiya, A. Kawashima, H. Habazaki, E. Akiyama, N. Kumagai
and K. Hashimoto
J. Appl. Electrochem. 29 765-771
(1999).
12
Oxygen evolution anodes in seawater electrolysis
K. Fujimura, T. Matsui, K. Izumiya, N. Kumagai, E. Akiyama, H. Habazaki,
A. Kawashima, K. Asami and K. Hashimoto
Mater.
Sci. Eng. A267, 254-259 (1999).
III.
Catalysts
1
Decomposition of nitrogen monoxide over amorphous Co-65Zr alloys
containing platinum group elements
M. Komori, H. Habazaki, E. Akiyama, A. Kawashima, K. Asami and K. Hashimoto
Materials Transaction, JIM, 34, 725-731 (1993).
2
Nitrogen monoxide decomposition catalysts prepared from amorphous
Co-Zr-Pd alloys
M. Komori, H. Habazaki, E. Akiyama, A. Kawashima, K. Asami and K. Hashimoto
Corrosion, Electrochemistry and Catalysis of Metastable Metals and Intermetallics, (ed. C. R.
Clayton and K. Hashimoto), p.369-380, The Electrochemical Society,
Pennington, NJ (1993).
3
Amorphous alloys for hydrolysis of
CCl2F2
A. Hirota, K. Ebidzuka, H. Habazaki, E. Akiyama,
A. Kawashima, K. Asami and K. Hashimoto
Corrosion, Electrochemistry and Catalysis of Metastable Metals and Intermetallics, (ed. C. R.
Clayton and K. Hashimoto), p.381-392, The Electrochemical Society,
Pennington, NJ (1993).
4
Decomposition of CCl2F2 through hydrolysis by
amorphous alloy catalysts
K. Ebidzuka, H. Habazaki, E. Akiyama, A. Kawashima, K. Asami and K. Hashimoto
Mater.
Sci. Eng. A181/A182, 1091-1094 (1994).
5
Nitrogen monoxide decomposition catalysts prepared from amorphous
Ni-valve metal-Pd alloys
M. Komori, H. Habazaki, E. Akiyama, A. Kawashima, K. Asami and K. Hashimoto
Mater.
Sci. Eng. A181/A182, 1123-1127 (1994).
6
Amorphous Fe-valve metal-platinum group metal alloy catalysts for methanation of carbon dioxide
T. Tada, H. Habazaki,
E. Akiyama, A. Kawashima, K. Asami and K.
Hashimoto
Mater.
Sci. Eng. A181/A182, 1133-1136 (1994).
7
Decomposition of nitrogen monoxide over palladium-supported NiTa2O6
catalysts prepared from amorphous alloy precursors
M. Komori, E. Akiyama, H. Habazaki, A. Kawashima, K. Asami
and K. Hashimoto
Appl. Catal. B, Environmental, 9, 93-106 (1996).
8
The microcomposite structure of catalysts
prepared by oxidation of amorphous Ni-Ta-Pd alloys
B.-P. Zhang, K. Funayama, E. Akiyama, H. Habazaki,
A. Kawashima, K. Asami and K. Hashimoto
Materials Transactions, JIM, 38, 123-132 (1997).
9
NO decomposition catalysts prepared from amorphous No-Ta-Pd
alloys
M. Komori, E. Akiyama, H. Habazaki, A. Kawashima, K. Asami
and K. Hashimoto
Appl. Catal. B, Environmental, 11, 243-255
(1997).
10
CO2 methanation catalysts prepared
from amorphous Ni-Zr alloy precursors
K. Shimamura, M.
Komori, H. Habazaki, T. Yoshida, M. Yamasaki, E.
Akiyama, A. Kawashima, K. Asami and K.
Hashimoto
Supple.
to Mater. Sci.
Eng., A226-228, 376-379 (1997).
11
Application of sputter deposition technique to the preparation of
amorphous alloy-derived catalysts for NO decomposition
K. Funayama, H. Habazaki, E. Akiyama, A. Kawashima, K. Asami, K. Hashimoto and M. Komori
Mater.
Trans. JIM, 38, 643-649 (1997).
12
Composition dependence of the CO2 methanation activity of Ni/ZrO2 catalysts prepared from
amorphous Ni-Zr alloy precursors
M. Yamasaki, H. Habazaki, T. Yoshida, E. Akiyama, A. Kawashima, K. Asami and K. Hashimoto
Appl. Catal. A, General 163, 187-197
(1997).
13
Methanation of carbon dioxide on catalysts
derived from amorphous Ni-Zr-rare earth element
alloys
H. Habazaki, T.
Yoshida, M. Yamasaki, M. Komori, K. Shimamura, E.
Akiyama, A. Kawashima and K. Hashimoto
Studies
in Surf. Sci. Catal. 114, 261-266 (1998).
14
Characterization of CO2 methanation
catalysts prepared from amorphous Ni-Zr and Ni-Zr-rare earth element alloys
M. Yamasaki, H. Habazaki, T. Yoshida, M. Komori, K. Shimamura, E. Akiyama, A. Kawashima, K. Asami and K. Hashimoto
Studies
in Surf. Sci. Catal. 114, 451-454 (1998).
15
CO2 methanation catalysts prepared
from amorphous Ni-Zi-Sm and Ni-Zr-mish metal alloy precusors
M.
Yamasaki, M. Komori, E. Akiyama, H. Habazaki, A.
Kawashima, K. Asami and K. Hashimoto
Mater.
Sci. Eng. A267, 220-226 (1999).
16
Materials for global carbon dioxide recycling
K. Hashimoto, M. Yamasaki, S. Meguro, T.
Sasaki, H. Katagiri, K. Izumiya, N. Kumagai, H. Habazaki, E. Akiyama
and K. Asami
Corrosion Science,,, 44, 371-386 (2002).
IV.
Reviews
1
Corrosion-resistant amorphous surface alloys
K. Hashimoto, N. Kumagai, H. Yoshioka, J. H. Kim, E. Akiyama, H. Habazaki, S. Mrowec, A. Kawashima
and K. Asami
Corrosion Science, 35, 363-370 (1993).
2
Recent progress in corrosion-resistant metastable alloys
K. Hashimoto, P. Y. Park, J. H. Kim, H.
Yoshioka, E. Akiyama, H. Habazaki, A. Kawashima, K.
Asami, Z. Grzesik and S.
Mrowec
Mater.
Sci. Eng. A198, 1-10 (1995).
3
Recent progress in corrosion-resistant new alloys prepared by sputter
deposition
K. Hashimoto, H. Habazaki, E. Akiyama, H. Yoshioka, J. H. Kim, P. Y. Park, A.
Kawashima, and K. Asami
Sci.
Rep.
Res.
inst.
Tohoku
University,
A42, 99-105 (1996).
4
Substantiation plant of global CO2 recycling
K. Hashimoto, H. Habazaki and E. Akiyama
J. Soc.
Mat. Sci.,
Japan,
45, 1067-1068 (1996). (in Japanese)
CO2リサイクル実証プラント
橋本功二，幅崎浩樹，秋山英二
材料, 45 [9], 1067-1068
(1996).
5
Global CO2 recycling
K. Hashimoto, E. Akiyama, H. Habazaki, A. Kawashima, K. Shimamura, M. Komori and N. Kumagai
Zairyo-to-Kankyo [Corros. Eng.], 45 [10], 614-620
(1996). (in Japanese)
グローバルCO2リサイクル
橋本功二，秋山英二，幅崎浩樹，川嶋朝日，嶋村和郎，古森充，熊谷直和
材料と環境, 45 [10], 614-620
(1996).
6
Roles of chromium, molybdenum and tungsten in spontaneous passivity of
sputter-deposited single phase alloys in concentrated hydrochloric
acids
K. Hashimoto, J.-H. Kim, P.-Y. Park, J. Bhattarai, E. Akiyama, H. Habazaki, A. Kawashima and K. Asami
Proc.
13th Int. Cong. Corrosion, paper 444, 1-10
(1996).
7
The role of phosphorus in enhancing corrosion resistance of amorphous
alloys
K. Hashimoto, B. P. Zhang, B.-M. Im, H. J. Lee, E. Akiyama, H. Habazaki, A. Kawashima, K. Asami
Sci.
Rep.
Res.
inst.
Tohoku
University,
A43 (1997) 145-151.
8
Global CO2 recycling
K. Hashimoto, E. Akiyama, H. Habazaki, A. Kawashima
ECO
INDUSTRY, 2
[2], 5-14 (1997). (in
Japanese)
グローバルCO2リサイクル
橋本功二，秋山英二，幅崎浩樹，川嶋朝日
月刊エコインダストリー, 2 [2], 5-14
(1997).
9
Energy balance of global CO2 recycling and amounts of
reduction of CO2 emission
K. Hashimoto, E. Akiyama, H. Habazaki, A. Kawashima, M. Komori, K. Shimamura and N. Kumagai
Sci.
Rep.
Res.
inst.
Tohoku
University,
A43[2], 153-160 (1997).
10
Global CO2 recycling
K. Hashimoto, K. Izumiya, E. Akiyama, H. Habazaki, A. Kawahima, K. Shimamura, M. Komori, N. Kumagi
CERAMIC
DATA BOOK '97, 25, 108-116 (1997). (in Japanese)
グローバル二酸化炭素リサイクル
橋本功二，泉屋宏一，秋山英二，幅崎浩樹，川嶋朝日，嶋村和郎，古森充，熊谷直和
CERAMIC
DATA BOOK '97, 25, 108-116 (1997). (in Japanese)
11
Electrochemistry and Corrosion Engineering of Global CO2
Recycling
K. Hashimoto, K. Izumiya, K. Fujimura, M.
Yamasaki, E. Akiyama, H. Habazaki, A. Kawashima, M.
Komori, K. Shimamura and N. Kumagai
Proc.
CORROSION 98 Research Topical Symposium on Corrosion in Advanced Materials and
Systems, NACE, pp.1-14 (1998).
12
Sputter-deposited amorphous and nanocrystalline
alloys with extremely high corrosion resistance
K. Hashimoto, H. Mitsui, J. Bhattarai, P.-Y. Park, J.-H. Kim, X.-Y. Li, A. A. El-Moneim, E. Akiyama, H. Habazaki,
A. Kawashima and K. Asami
Proc.
4th Special Symposium on Advanced Materials,
pp.51-54 (1998)
13
Spontaneously passivated sputter-deposited
alloys with higher corrosion resistance than alloy components
K. Hashimoto, J. Bhattarai, X.-Y. Li, P.-Y. Park, J.-H. Kim, E. Akiyama, H.
Habazaki, A. Kawashima, K. Asami and K. Shimamura
Proc.
Symposium on Passivity and Its Breakdown, p.369-383,
The Electrochemical Society, Pennington,
NJ (1998).
14
Global CO2 Recycling
-Novel Materials, Reduction of CO2 Emission, and Prospect-
K. Hashimoto, K. Izumiya, K. Fujimura, M.
Yamasaki, E. Akiyama, H. Habazaki, A. Kawashima, M.
Komori, K. Shimamura and N. Kumagai
Advances
in Materials, Mater. Sci.
Eng. A267, 200-206 (1999).
15
Global CO2 Recycling
K. Hashimoto, M. Yamasaki, K. Fujimura, T.
Matsui, K. Izumiya, E. Akiyama, H. Habazaki, A.
Kawashima, K. Asami and N. Kumagai
SODA
& CHLORINE, 50, 224-232 (1999). (in Japanese)
グローバル二酸化炭素リサイクル
橋本功二，山崎倫昭，藤村和也，松井徹郎，泉屋宏一，秋山英二，幅崎浩樹，川嶋朝日，浅見勝彦，熊谷直和
ソーダと塩素 (SODA & CHLORINE), 50 224-232
(1999).
16
Spontaneously passive amorphous Fe-Cr-Ni-Ta alloys in 12 M HCl
K. Hashimoto, X-Y Li, E. Akiyama, H. Habazaki, A. Kawashima and K. Asami
Proc.
14th Int. Cong. Corrosion Paper No.400, p.1-10
(1999).
17
Global CO2 Recycling -To avoid global warming and to supply
abundant energy-
K. Hashimoto, M. Yamasaki, T. Matsui, K.
Izumiya, S. Meguro, A. Sasaki, H. Katagiri, E.
Akiyama, N. Kumagai, H. Habazaki, A. Kawashima. K. Asami
ELECTRO-HEAT, 111, 1-9 (2000). (in Japanese)
グローバル二酸化炭素リサイクル −地球温暖化防止と豊富なエネルギー供給のために−
橋本功二，山崎倫昭，松井徹郎，泉屋宏一，目黒眞作，佐々木昭仁，片桐洋，秋山英二，熊谷直和，幅崎浩樹，川嶋朝日，浅見勝彦
エレクトロヒート, 111, 1-9 (2000).
18
Spontaneously passive alloys prepared by sputter deposition using targets
consisting of Type 304 stainless steel and valve metals.
K. Hashimoto, X.-Y. Li, K. Shimamura, E. Akiyama, H. Habazaki, A. Kawashima and K. Asami
Proc.
8th Int. Symp. Passivity
(2000) in press.
19
Global CO2 Recycling- Novel Materials, Reduction of CO2
Emission, and Prospect-
K. Hashimoto, K. Izumiya, K. Fujimura, M.
Yamasaki, E. Akiyama, H. Habazaki, A. Kawashima, M.
Komori, K. Shimamura and N. Kumagai
Advances in Materials, Springer Verlag (2000) in press.
20
Global CO2 recycling using solar energy and hydrolysis of sea
water
Koji Hahimoto,
Michiaki Yamasaki, Shinsaku Meguro, Teruhito Sasaki, Hiroshi Katagiri,
, Eiji Akiyama, Naokazu
Kumagai, Hiroki Habazaki,
Asahi Kawashima and Katsuhiko Asami
Kaiyou Kaihatsu News, 28, 3-8 (2000). (in Japanese)
太陽エネルギーと海水電解を利用するグローバル二酸化炭素リサイクル
橋本功二，山崎倫昭，泉屋宏一，目黒眞作，佐々木昭仁，片桐洋，秋山英二，熊谷直和，幅崎浩樹，川嶋朝日，浅見勝彦
海洋開発ニュース，28, 3-8 (2000).
21
Global carbon dioxide recycling
Koji Hahimoto,
Michiaki Yamasaki, Shinsaku Meguro, Teruhito Sasaki, Hiroshi Katagiri,
Naokazu Kumagai, Koichi
Izumiya, Hiroki Habazaki, Eiji Akiyama, Asahi Kawashima and Katsuhiko Asami
Hyomen Gijutsu, 52, 195-200 (2001). (in Japanese)
グローバル二酸化炭素リサイクル
橋本功二，山崎倫昭，目黒眞作，佐々木昭仁，片桐洋，熊谷直和，泉屋宏一，幅崎浩樹，秋山英二，川嶋朝日，浅見勝彦
表面技術, 52, 195-200
(2001).
22
Tailoring Electrodes and catalysts for CO2 recycling
plant
Koji Hashimoto, Shinsaku Meguro, Teruhito Sasaki,
Hiroshi Katagiri, Michiaki Yamasaki, Koichi Izumiya,
Naokazu Kumagai, Hiroki
Habazaki, Asahi Kawashima , Katsuhiko Asami and Eiji Akiyama
Materia, 40, 372-375 (2001). (in Japanese)
CO2リサイクルプラント用電極および触媒の創製
橋本功二，目黒眞作，佐々木昭仁，片桐洋，山崎倫昭，泉屋宏一，熊谷直和，幅崎浩樹，川嶋朝日，浅見勝彦，秋山英二
まてりあ, 40, 372-375
(2001).
23
Advanced materials for global carbon dioxide
recycling
Koji Hashimoto, Hiroki Habazaki, Michiaki Yamasaki, Shinsaku Meguro, Teruhito Sasaki,
Hiroshi Katagiri, Tetsuro
Matsui, Kazuya Fujimura, Koichi Izumiya, Naokazu Kumagai, and Eiji
Akiyama
Materials Science and Engineering, A304-306, 88-96 (2001).
V. Organic
Chemistry
1
Total synthesis and absolute configuration of (-)-sedacryptine
E. Akiyama and M. Hirama
Synlett, 100-102
(1996).
VI.
Patents
1
Cathode material for hydrogen generation
K. Hashimoto, K.
Hayashi, E. Akiyama, A. Kawashima, K. Asami
Application numbr : 06085736
Publication number :
07268676
Date of publication of
application : 17.10.1995
1.
水素発生用陰極材料
橋本功二，林 桂三，秋山英二，川嶋朝日，浅見勝彦
出願日1994年3月31日 特願平6-085736特開平5-
公開番号: 特開平07-268676
公開日: 1995年10月17日
2
Amorphous alloy catalyst for nitrogen decomposition
K. Hashimoto, M. Komori, A. Kawashima, K. Asami, H. Habazaki, E.
Akiyama
Application numbr :
06237087
Publication number : 08099039
Date of publication of application : 16.04.1996
3
Oxygen generation electrode
K. Hashimoto, K. Izumiya, K. Asami, A. Kaashima, E. Akiyama
Application numbr :
07085530
4
Oxygen generation electrode
K. Hashimoto, K. Izumiya, E. Akiyama, A. Kawashima
Application numbr :
08064539
5
Amorphous alloy catalyst for conversion of carbon dioxide into
methane
K. Hashimoto, M. Komori, K. Shimamura, T.
Yoshida, H. Habazaki, E. Akiyama
Application numbr :
08204543
Publication number : 10043594
Date of publication of application : 17.02.1998
6
Oxygen generation electrode
K. Hashimoto, K. Izumiya, E. Akiyama, T. Yoshida, M. Komori, K. Shimamura
Application numbr :
08310094
7
Amorphous alloy catalyst for conversion of carbon dioxide into
methane
K. Hashimoto, M. Komori, K. Shimamura, T.
Yoshida, H. Habazaki, E. Akiyama
Application numbr :
09051598
Publication number :10244158
Date of publication of application : 14.09.1998
8
Oxygen generation electrode and its production
K. Hashimoto, K. Izumiya, E. Akiyama, H. Habazaki, A. Kawashima, K. Asami
Application numbr :
09033513
Publication number : 10287991
Date of publication of application : 27.10.1998
9
Amorphous alloy catalyst for reformed gas hydrocarbon and use of the
catalyst
K. Hashimoto, H. Habazaki, E. Akiyama, H. Chiyou, T. Yoshida, T. Yamazaki, K. Ishii, S. Kono
Application numbr :
09087241
Publication number : 10263400
Date of publication of application : 06.10.1998
10
Method for electrolyzing aqueous solution containing chlorine ion to
produce oxygen and hydrogen and electrolytic device
K. Hashimoto, K. Izumiya, E. Akiyama, A. Kawashima, N. Kumagai, Y. Samata
Application numbr :
10058702
Publication number : 11256383
Date of publication of application : 21.09.1999
11
Oxygen generation electrode and its production
method
K. Hashimoto, K. Izumiya, E. Akiyama, A. Kawashima, N. Kumagai
Application numbr :
10058704
Publication number : 11256385
Date of publication of application : 21.09.1999
2 NOx分解用アモルファス合金触媒
橋本功二，小森 充，川嶋朝日，浅見勝彦，幅崎浩樹，秋山英二
出願日1994年9月30日 特願平6-237087 特開平8-99039
公開番号: 特開平08-099039
公開日: 1996年04月16日
3 酸素発生用電極
橋本功二，泉屋宏一，浅見勝彦，川嶋朝日，秋山英二
出願年月日 平成7年11月ｘ日 特願平7-85530
4 酸素発生用電極
橋本功二，泉屋宏一，秋山英二，川嶋朝日，浅見勝彦
出願年月日 平成8年 特願平8-64539
5 二酸化炭素のメタン化用アモルファス合金触媒
橋本功二，幅崎浩樹，秋山英二，吉田 健，小森 充，嶋村和郎
出願年月日 平成8年8月2日 特願平08-204543号
公開番号: 特開平10-043594
公開日: 1998年02月17日
6 酸素発生用電極
橋本功二，泉屋宏一，秋山英二，幅崎浩樹，川嶋朝日，浅見勝彦
出願年月日 平成8年11月21日 特願平8-310094
7 二酸化炭素のメタン化用アモルファス合金触媒
橋本功二，幅崎浩樹，秋山英二，吉田 健，小森 充，嶋村和郎
出願年月日 平成9年3月6日 特願平9-51598号
特開平10-244158 平成10年9月14日
公開番号: 特開平10-244158
8 酸素発生用電極とその作製方法
橋本功二，泉屋宏一，秋山英二，幅崎浩樹，川嶋朝日，浅見勝彦
出願年月日 平成9年2月18日 特願平9-33513
公開番号: 特開平10-287991
公開日: 1998年10月27日
9 炭化水素改質ガス用アモルファス合金触媒とその用法
橋本功二，幅崎浩樹，秋山英二，
張波萍，吉田健，山崎倫昭，石井宏治，河野駿平
出願年月日 平成9年3月24日 特願平9-87241
公開番号: 特開平10-263400
公開日: 1998年10月06日
10 塩素イオンを含有する水溶液を電解して酸素と水素を発生する電解方法および電解装置
橋本功二，泉屋宏一
，秋山英二，川嶋朝日，熊谷直和，佐俣芳光
出願年月日 平成10年3月10日 特願平10-58702 特開平11-256383
公開番号: 特開平11-256383
公開日: 1999年09月21日
出願番号: 特願平10-058702
11 酸素発生用電極とその製造方法
橋本功二，泉屋宏一，秋山英二，川嶋朝日，熊谷直和
出願年月日 平成10年3月10日 特願平10-58704 特開平11-256385
公開番号: 特開平11-256385
公開日: 1999年09月21日